Covidien Nellcor GR101704, Service Manual

Page: 95 / 236

Service Mode
Service Manual 6-33
6.5.5
Parameter Activation Menu
Utilize this menu in conjunction with any upgrades to the parameter module.
The upgrade will come with instructions for that particular parameter.
To activate a parameter already installed in the monitoring system
1.
Access the service function menu. Reference To access service function menus , p. 6-18.
2.
Select PARAMETER ACTIVATION.
3.
Select the desired parameter.
4.
Select the desired option.
a.
Press NEXT, then follow instructions per the activation instructions in the
upgrade kit.
b.
Press CANCEL.
5.
If continuing, press NEXT.
6.
If continuing, press FINISH.
7.
Select the desired option.
a.
Press BACK to return to the previous submenu.
b.
Press EXIT MENU.
6.5.6
About Monitor Menu
This screen provides model, serial number, version of software, MAC
addresses, and IP addresses, if assigned, for LAN or WLAN connectivity.
To obtain information about the monitoring system
1.
Access the service function menu. Reference To access service function menus , p. 6-18.
2.
Select ABOUT MONITOR.
3.
Review data.
4.
Select the desired option.
a.
Press FINISH to complete the review.
b.
Press CANCEL.
5.
Select the desired option.