Covidien Nellcor GR101704, Service Manual

Page: 55 / 236

5-1
5 Installation
5.1
Overview
This chapter contains information for the installation and set up of the
Nellcor™ Bedside Respiratory Patient Monitoring System, prior to first-time
usage by the clinician. Before operating the monitoring system, thoroughly
read the
Operator's Manual .
Inspect the monitoring system for mechanical and functional damage or dete-
rioration prior to every use. Do not use if it appears damaged or does not
perform as expected. Have a qualified service technician install and set up the
monitoring system after performing functional tests per the
Service Manual .
5.2
Safety Reminders

WARNING:
Explosion hazard — Do not use the monitoring system in the presence of
flammable anesthetics.

WARNING:
Use the test data sheet to ensure the monitoring system passes all safety,
performance, and functional tests prior to use in a clinical setting.

WARNING:
To ensure patient safety, do not place the monitoring system in any position
where it might tip or fall on the patient. Do not allow direct contact with the
patient.

WARNING:
As with all medical equipment, carefully route patient cabling to reduce the
possibility of patient entanglement or strangulation.