Screens
5-2
Operator's Manual
5.1.1
Welcome Screen
The Welcome screen is displayed, followed by a 10-second self-test after pressing the ON/OFF
key.
Figure 5-1.
Welcome Screen
5.1.2
Start Screen, Navigation Bar, Key Panel and Software Version
The Start screen displays the software version, date, time, and operator-selectable navigation bar.
For each screen, the navigation bar is displayed at the bottom of the screen and above the corre-
sponding menu key. The operator selects the desired menu option by pressing the white menu
keys or the HOME key on the key panel.
The INVOS™ system software version appears where XX.XX.XX is shown in
The message “USB FLASH DRIVE NOT CONNECTED” will blink on the Start screen if the USB flash
drive is not inserted or fully engaged. The operation of the INVOS™ system will occur with or
without the USB flash drive connected. However, for real-time data collection to the USB flash
drive, it must be connected prior to beginning a case.
Summary of Contents for INVOS 5100C
