Owner’s Manual
Model #DG1214, DG1215, DG1216, DG1217, DG1218, DG1219
Dodge Challenger
About Your Coverking® Product
Congratulations on your purchasing decision. Coverking® designed this Front End Cover to be the very best available. With proper care,
your Coverking® Front End Cover will provide years of stylish looks and maximum protection.
Installation of the Front End Cover is a simple process that should take about 30 minutes. Removal and reinstallation (as for car washing)
takes just a few minutes.
If you encounter any problems during the installation of your Coverking® Front End Cover, please contact our Consumer Response
Department, Monday - Friday, 7AM - 5PM (PST) at 1-800-400-1120.
Note:
Please read this manual thoroughly before beginning the installation. After completing installation, keep this manual for further
reference.
Tips for Easier Installation and Care
[] Before Installation, wash and wax your vehicle. Use a paste wax—not a spray—on the hood and fenders in order to maintain the finish
underneath the Coverking® Front End Cover.
[] Install the Front End Cover in temperatures of
70˚F
(21˚C)
or higher. The warmth will make the fabric more pliable and will allow it to
stretch slightly for a tighter and smoother fit.
[] Do not use vinyl cleaners or protectants on your Coverking® Front End Cover. These cleaners reduce the breathability of the vinyl and
will void the Coverking® Warranty.
[] Do not install the Coverking® Front End Cover on any vehicle that does not still have its original factory paint. Coverking® will not be
held liable for any warranty claims of paint damage to repainted vehicles.
[] Remember that the Front End Cover also protects paint from fading due to sunlight while the rest of the car is exposed.
Coverking® will not be held liable for any warranty claims on sun-faded paint.
[]
Caution
:
There may be elastic straps described in some sections of this manual that can snap back if not properly hooked. To
avoid injuries, exercise caution and use safety glasses when installing.
[]
DO NOT PULL UP ON THE CLIPS OR THE FABRIC TO REMOVE THE COVER.
When removing the cover, it will be easiest to
reverse the installation steps.
Defining Custom Accessories
