COVANA OASIS COVER, Owner'S Manual, Page: 52 / 82

page-
50
OASIS COVER
INSTALLATION CHECKLIST (CUSTOMER COPY)
To ensure proper installation you must carefully read this checklist and confirm that you have completed all steps
of the installation. The customer must receive a completed copy of this checklist.
(Please check each circle when the point is completed)
O
The base preparation steps are done correctly (Location and Foundation preparation sections) .
O
The installation steps are done correctly (Unpacking, Cover assembly, Lifting mechanism and Electrical
connections sections) .
O
The seal is properly installed and there is no steam leaking out around the cover. (Seal application section)
O
The key switch is permanently installed at least 5 ft (1.5 m) away from the spa and 5 ft (1.5 m) from the
ground.
O
The electrical portion of the installation was done by a certified electrician (Electrical connections, Limit
switch adjustment sections) .
O
All parts supplied and included into the crate are installed.
O
The start-up procedure is completed (The key sequence responds correctly and Testing the cover section
is completed) .
O
The all-weather seal works properly (The cover raises and lowers properly) .
O
The middle sleeves slide freely (Manually slide the middle sleeve up and down when the cover is half
open) .
Serial number: ____________________________________________
Installer name: _________________________ Signature:______________________________________
Customer name: _______________________ Signature:______________________________________
Customer address: ____________________________________________
Date (YYYY/MM/DD): ____________________________________________
Dealer name : ____________________________________________
241146 OWNER'S MANUAL REVISION 1