35
#5 BOLT M6*35
5
7
1
2
3
3
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Fasten the braces (#3) to the right and left legs (#1 and
#2). Fasten them by using steel washers (#7) and bolts
(#5). See Figure 1.
PAGE 1 OF 2
COURTYARD CREATIONS INC.
Use the correct bolts as indicated. Do not tighten any of the bolts until the ottoman
is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
HEX. KEY WRENCH 4MM
HEX. KEY WRENCH 6MM
STEEL WASHER
BOLT M6*35
FIGURE 1
PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
PART
NO.
MATERIAL CODE
PART
Q’TY
1
1
1
1
2
4
6
7
8
9
10
4
4
1
1
XTM011X-CS04-4
XTM011X-CS04-3
62XTM011XQ101
XTM011X-CS02-1
17C02A0712003YX
17C40A0712001YX
17XA3309
17KAA0201----Y4
17KAA0101----Y4
RIGHT LEG
LEFT LEG
BRACE
SEAT ASSEMBLY
BOLT M6*35
2
3
4
5
Note:
The labels marked “L” and “R” on the legs (#1 and #2)
should coincide with Figure 1 to ensure proper assembly.
L
R
!
!
!
!
!
XTM011X
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
STOP
DO NOT RETURN TO THE STORE!
1
HEX. KEY WRENCH 10MM
17KAC3101----Y3
V-3
