ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
XLS005U
-WM
Weight limit for each shelf is 30kg or 66lbs.
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
PAGE 1 OF 3
COURTYARD CREATIONS INC.
!
!
!
!
!
!
STOP
DON’T RETURN TO STORE!
PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
8
12
4
8
1
1
4
4
1
1
1
1
XLS005U-CS04-F
XLS005U-CS04-D
XLS005U-CS04-G
XLS005U-CS04-E
47LA66191
62XLS005UB101
62XLS005UB102
17C17A0403001Y4
17C01A0706001Y4
17FA05040301-Y4
17C33A0709001Y4
18000337001
18000337004
17KAA0101----Y4
RIGHT SUPPORT FRAME
LEFT SUPPORT FRAME
RIGHT LEG
LEFT LEG
MESH FRAME A
BACK FRAME
MESH FRAME B
UPPER STORY BACK
SCREW ST4.2*12
BOLT M6*16
BOLT CAP M6
WASHER d6.5*D13*1.0
BOLT M6*25
BOLT CAP
HEX.KEY WRENCH 4MM
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Note:
The label that are marked “1, 2, 3, 4” on the support frames
and the legs should coincide with Figure 1 & 2 to ensure proper
assembly.
FIGURE 1
9
1
1
Step 1:
Place the right support frame (#1) onto a non-abrasive surface,
such as a carpet. Insert the right leg (#3) to the right support
frame (#1) by using screws (#9). Repeat the same procedure
for the left support frame (#2) and the left leg (#4).
See Figure 1.
3
47LA71051
R
3
3
R
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex.Key Wrench (See Part #15)
