STOP
DON’T RETURN TO STORE!
PAGE 6 OF 6
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do
not use bleach, acid, or other solvents on the frame or fabric parts.
•
Wash glass with mild soap and water, rinse thoroughly, and dry completely.
Tempered glass has
been used for increased strength and safety of your table.
•
When moving this table, lift. Do not drag this table.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance
and safety of your table.
• In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and
protected area during off season periods.
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT 1-877-539-7436
BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
FIGURE 8
9
12
12
9
17
2
2
2
2
2
17
17
17
17
Step 10:
This gazebo table can also be
used as a regular table. Loosen
the bolts and remove the canopy
support and canopy. Then,
position the plastic corner
protectors (#17) onthe top of
table legs where the bolts were
just removed. Secure the plastic
corner protectors (#17) in place
by tightening all of the bolts and
covering them with bolts caps.