You will need the following tools:
- Phillips Screwdriver (Not included)
- Hex. Key Wrench (See Parts #7)
- Hex. Key Wrench (See Parts #8)
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Insert the legs (#2) into the plastic holders attached on
the underside of the table top (#1) rim. Fasten them
together by using screws (#4). See Figure 1.
PART
NO. MATERIAL CODE
PART
Q’TY
COURTYARD CREATIONS INC.
PAGE 1 OF 2
V-5
FIGURE 1
TGS39PS
1
2
3
4
4
1
4
1
5
6
7
8
1
1
8
8
TGS39PS-CS01
TGS39PS-CS02
62TGS39PSY101
17C17A0403001YX
17KAC3101----Y3
17KAA0101----Y4
17FC05020601-YX
17C40A0708001YX
TABLE TOP
LEG
CENTER CONNECTOR
SCREW ST4.2*12
HEX. KEY WRENCH 10MM
HEX. KEY WRENCH 4MM
WASHER d6.5*D10*1.6
BOLT M6*20
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO. MATERIAL CODE
PART
Q’TY
STOP
DO NOT RETURN TO STORE!
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts
and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed
by children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
