PAGE 1 OF 2
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside facing
upwards. Insert the legs (#2) into the plastic holders
attached on the underside of the table top (#1)
rim. Fasten them together by using screws (#4).
See Figure 1.
FIGURE 1
TABLE TOP
LEG
CENTER CONNECTOR
SCREW ST4.2*12
HEX.KEY WRENCH 6MM
BOLT CAP M6
WASHER d6.5*D13*1.0
BOLT M6*16
17FA05040301-Y4
18000337002
17KAA0201----Y4
17C17A0403001Y4
1
2
3
4
4
1
4
1
5
6
7
8
62TGS38PBY101
8
8
8
1
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #8)
TGS38PB-CS05-1
TGS38PB-CS04-1
1
2
2
2
2
4
17C01A0706002Y4
TGS38PB
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
COURTYARD CREATIONS INC.
Q’TY
PART
PART
NO. MATERIAL CODE
Q’TY
PART
PART
NO. MATERIAL CODE
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
PARTS LIST
STOP
DON’T RETURN TO STORE!
