ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
TGS24CK
PAGE 1 OF 2
V-3
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
1
1
8
8
4
1
1
4
8
7
6
5
4
3
2
1
HEX. KEY WRENCH 10MM
WASHER d6.5*D10*1.6
BOLT M6*15
LEG
TABLE TOP
17C17A0403001YX
17KAC3101----Y3
17KAA0101----Y4
17FC05020601-YX
17C40A0705001YX
Q’TY
Q’TY
PART
PART
MATERIAL CODE
MATERIAL CODE
PART
NO.
PART
NO.
PARTS LIST
SCREW ST4.2*12
HEX. KEY WRENCH 4MM
CENTER
CONNECTOR
TGS24CK-CS01
TGS24CK-CS02
62TRS24KPY101
2
1
4
2
2
2
FIGURE 1
You will need the following tools:
- Phillips Screwdriver (Not included)
- Hex. Key Wrench (See Part #7)
- Hex. Key Wrench (See Part #8)
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside
facing upwards. Insert the legs (#2) into the plastic
holders attached on the underside of the table top
(#1) rim. Fasten them together by using screws
(#4). See Figure 1.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is
completely assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the
parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed
by children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
STOP
DO NOT RETURN TO STORE!
