STOP DO NOT RETURN TO THE STORE!
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
A weighted umbrella base must be used when using an umbrella with this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
!
PAGE 1 OF 2
V-3
COURTYARD CREATIONS INC.
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
ASSEMBLY INSTRUCTIONS
HEX. KEY WRENCH 10MM
HEX. KEY WRENCH 4MM
TCS66BK
PARTS LIST
PART
NO. MATERIAL CODE
PART
Q’TY
1
2
3
1
1
2
14
7
8
1
1
TCS66BK-CS05-1
TCS66BC-CS04-1
62TCS66BCY101
13C??1B29008001
17C40A0705001YX
17KAA0101----Y4
17KAC3101----Y3
TABLE TOP
LEG
CENTER
CONNECTOR WITH RING
BOLT M6*15
TILE
6
5
4
Note:
The tiles can be easily broken, be careful when
removing them.
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the legs (#2) to the underside of the table top
(#1) rim by using bolts (#5). Keep the bolts loose.
See Figure 1.
FIGURE 1
1
5
2
2
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
