TCS41CG
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the legs (#2) to the underside of the table top (#1)
rim by using bolts (#5). Keep the bolts loose.
See Figure 1.
PARTS LIST
1
1
6
4
4
8
8
1
1
TCS41CG-CS05-1
TCS41CG-CS04-1
62TCS42CKY101
13C??1B29008001
17C40A0709001YX
17C40A0705001YX
17KAA0101----Y4
17KAC3101----Y3
TABLE TOP
LEG
CENTER
CONNECTOR
TILE
BOLT M6*25
BOLT M6*15
WASHER d6.5*D10*1.6
HEX. KEY WRENCH 4MM
HEX. KEY WRENCH 10MM
FIGURE 1
PART
NO.
MATERIAL CODE
PART
Q’TY
1
2
3
4
5
6
8
17FC05020601-YX
7
9
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
5
2
2
2
2
1
PAGE 1 OF 2
V-3
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely
assembled.
Do not sit or stand on this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
Note:
The tiles can be easily broken, be careful when removing
them.
STOP DO NOT RETURN TO STORE!
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
#5 BOLT M6*25
25
