ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 3
COURTYARD CREATIONS INC.
STOP
DON’T RETURN TO STORE!
Step 1:
Place the right arm (#4) onto a non-abrasive surface,
such as a carpet. At the front of the bench, fasten
both the left arm (#3) and the right arm (#4) to the
seat assembly (#2) by using bolts (#5 and #6) and
washers (#8). Keep the bolts loose. See Figure 1.
Note:
The labels marked “L” and “R” on the arms (#3 and
#4) should coincide with Figure 1 to ensure proper
assembly.
KWS620J-
WM
FIGURE 1
RIGHT ARM
BOLT M6*16
BOLT M6*14
SEAT ASSEMBLY
BOLT M6*35
WASHER d6.5*D13*1.0
BOLT CAP
HEX.KEY WRENCH 4MM
HEX.KEY WRENCH 6MM
BOLT CAP M6
LEFT ARM
PARTS LIST
PART
NO.
PART
NO.
1
1
7
2
4
2
8
1
1
8
9
10
11
12
1
1
1
2
4
2
3
4
5
6
17C02A0712003Y4
17FA05040301-Y4
18000337004
18000337006
17KAA0101----Y4
17KAA0201----Y4
KWS620J-CS02
KWS620J-CS03
KWS620J-CS01
KWS620J-CS04
17C33A0706001Y4
17C02A0755131Y4
BACK ASSEMBLY
MATERIAL
CODE
MATERIAL
CODE
PART
PART
Q’TY
Q’TY
Attention:
Make sure that each bolt needed for all steps
matches the corresponding figure to ensure proper
assembly.
16
5
6 10
2
4
3
9
8
14
#5 BOLT M6*16
#6 BOLT M6*14
L
R
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
