ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
KLS132S-
WM
PAGE 1 OF 2
COURTYARD CREATIONS INC.
STOP
DON’T RETURN TO STORE!
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
!
!
!
!
!
PARTS LIST
PART
NO.
PART
Q’TY
1
1
1
1
2
12
8
1
2
3
4
5
6
7
12
11
10
9
2
8
2
1
1
MATERIAL CODE
PART
NO.
PART
Q’TY
MATERIAL CODE
LEFT LEG
RIGHT LEG
BOLT M6*16
BOLT M6*35
PLASTIC NUT M6*P1.0
BOLT CAP
BOLT CAP M6
NUT WRENCH 10&13MM
HEX.KEY WRENCH 4MM
BACK ASSEMBLY
SEAT ASSEMBLY
KLS132S-CS01
KLS132S-CS02
KLS132S-CS03
KLS132S-CS04
17C33A0706001Y4
17C01A0712001Y4
8
WASHER d6.5*D13*1.0
17FA05040301-Y4
18000C23001
18000337004
18000337001
17KAA0101----Y4
17KAB1101----Y4
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
Step 1:
Place the right leg (#4) onto a non-abrasive surface,
such as a carpet, with its holes facing upwards. At the
rear, fasten the seat assembly (#2) to legs (#3 and #4)
by using bolts (#5) and washers (#7). Keep the bolts
loose. See Figure 1.
Note:
The labels marked “L” and “R” on legs (#3 and #4)
should coincide with Figure 1 to ensure proper
assembly.
FIGURE 1
16
3
2
5
7
9
5
7
9
#5 BOLT M6*16
L
4
R
