Operator’s Manual
20969 CRT Tiller
14
For additional information email
or call 800-345-6007 M-F 8-5
Wheel Lock pins
To place wheels in free-wheel position do as follows:
NOTE: This allows wheels to turn freely on the axle for
easy transportation.
1. Remove lock pin. Slide wheel inward toward machine.
SEE FIGURE 6
2. Insert lock pin through the axle hole only, fold lock ring
to secure pin to axle.
3. Repeat for other wheel.
To place wheels in tilling position, do as follows:
NOTE: This locks wheels to the axle so they are able to
propel the machine forward while in use.
1. Remove lock pin. Slide wheel slightly outward away from
machine. Align hole in axle with hole in wheel hub.
SEE FIGURE 7
2. Insert lock pin through both holes, fold lock pin ring to
secure pin to axle.
3. Repeat for other wheel.
NOTE: Always have both wheel lock pins in or out. Do not
operate tiller with only one wheel locked.
Free-Wheel Position
FIGURE 6
WHEEL LOCK PIN IN FREE-WHEEL POSITION
(LOCK PIN IN AXLE HOLE ONLY)
17459-0010R1
FIGURE 7
Tilling Position
WHEEL LOCK PIN IN TILLING POSITION
(LOCK PIN IN AXLE HOLE AND WHEEL HOLE)
17459-0012R1
NEVER START ENGINE OR OPERATE TILLER WITH
WHEELS IN FREE-WHEEL POSITION. ALWAYS SET THE
WHEELS IN TILLING POSITION BEFORE STARTING
ENGINE. THE FREE-WHEEL POSITION IS FOR
TRANSPORTING THE TILLER LONG DISTANCES OVER
LEVEL GROUND. DO NOT ATTEMPT TO MOVE THE
TILLER UP OR DOWN STEEP GRADES IN THE FREE-
WHEEL POSITION. YOU CAN LOOSE CONTROL OF
TILLER AND CAUSE SERIOUS INJURY OR DEATH.
WARNING
