background image

Operator’s Manual 

17455 Front Tine Tiller

For additional information email 

[email protected]

 or call 800-345-6007 M-F 8-5 CST

3

  DANGER

DANGER INDICATES A SERIOUS INJURY OR FATALITY 

WILL RESULT IF THE SAFETY INSTRUCTIONS THAT 

FOLLOW THIS SIGNAL WORD ARE NOT OBEYED.

  WARNING

WARNING INDICATES A SERIOUS INJURY OR FATALITY 

COULD RESULT IF THE SAFETY INSTRUCTIONS THAT 

FOLLOW THIS SIGNAL WORD ARE NOT OBEYED.

  CAUTION

CAUTION INDICATES YOU CAN OR YOUR EQUIPMENT 

CAN BE HURT IF THE SAFETY INSTRUCTIONS THAT 

FOLLOW THIS SIGNAL WORD ARE NOT OBEYED.

IMPORTANT

IMPORTANT INDICATES HELPFUL INFORMATION FOR 

PROPER ASSEMBLY, OPERATION, OR MAINTENANCE 

OF YOUR EQUIPMENT.

  WARNING

YOU MUST READ, UNDERSTAND AND COMPLY WITH 

ALL SAFETY AND OPERATING INSTRUCTIONS IN 

THIS MANUAL BEFORE ATTEMPTING TO SETUP AND 

OPERATE YOUR ROTOTILLER.
FAILURE TO COMPLY WITH ALL SAFETY AND 

OPERATING INSTRUCTIONS CAN RESULT IN LOSS OF 

MACHINE CONTROL, SERIOUS PERSONAL INJURY TO 

YOU AND/OR BYSTANDERS, AND RISK OF EQUIPMENT 

AND PROPERTY DAMAGE. THE TRIANGLE IN THE TEXT 

SIGNIFIES IMPORTANT CAUTIONS OR WARNINGS 

WHICH MUST BE FOLLOWED.
CALIFORNIA PROPOSITION 65 WARNING
ENGINE EXHAUST FROM THIS PRODUCT CONTAINS 

CHEMICALS KNOWN TO THE STATE OF CALIFORNIA 

TO CAUSE CANCER, BIRTH DEFECTS, OR OTHER 

REPRODUCTIVE HARM.

SRT

CRT

  DANGER

WARNINGS AND SAFETY PRECAUTIONS

OWNER’S RESPONSIBILITY

Accurate assembly and safe and effective use of the rototiller is 

the owner’s responsibility.

•  Read and follow all safety instructions.
•  Carefully follow all assembly instructions.
•  Maintain the tiller according to directions and schedule 

included in this CountyLine operator’s manual.

•  Ensure that anyone who uses the tiller is familiar with all 

controls and safety precautions.

SPECIAL MESSAGES

Your manual contains special messages to bring attention to 

potential safety concerns, machine damage as well as helpful 

operating and servicing information.  Please read all the informa-

tion carefully to avoid injury and machine damage.

NOTE: General information is given throughout the manual 

that may help the operator in the operation or service of 

the machine. 

IMPORTANT SAFETY PRECAUTIONS

Please read this section carefully.

 Operate the tiller according 

to the safety instructions and recommendations outlined here 

and inserted throughout the text.  Anyone who uses this tiller 

must read the instructions and be familiar with the controls. 

Your tiller is equipped with a safety device that enables you to 

stop the wheels and tines quickly in an emergency.  Learn how 

the drive safety control lever operates and how to control the 

tiller at all times.

This symbol points out important safety instructions 

which if not followed could endanger your personal 

safety. Read and follow all instructions in this man-

ual before attempting to operate this equipment.

•  Do not allow children to operate this rototiller. Keep small children 

away from the area being tilled. Do not allow adults to operate the 

tiller without proper instruction.

Intended Use / Foreseeable Misuse

IMPORTANT: 

 This is a motorized rotary tiller that works the 

soil by means of rotating tines.  It is pedestrian-controlled, but 

not self-propelled, with a gasoline-fueled internal combustion 

engine to power the tines.  It shall not be used for any other 

purpose.

Summary of Contents for 17455

























Reviews: