Installation Manual
www.cotytech.com
888-891-9321
ITEM #:MW-M23WB/MW-M25WB
Check
list
X1
X1
01
X1
02
03
X2
09
X1
10
X4
(M4X12)
04
X1
(2.5mm)
11
X4
(M6X40)
05
X1
(4mm)
12
X4
(M4X35)
06
X1
13
X4
07
X6
08
X1
(13
”
)
14
Step 1
1.Make sure the substantial wall before assembling.
2.Please take screwdriver to loosen the wall hanger then take out the cover of wall hanger.
Do not discard the cover of wall hanger after take it out!
3.Put the wall hanger on the exact place & height that you want and have 4 marks on the wall.
4.Install the wall hanger on the wall with 4 expansion bolts.
1.Place the bearings onto the spindle.
2.Place the arm onto the spindle and put the end cap on it.
3.Make sure C clip is fitted into groove of spindle securely for collecting
the cables.
4.Fix the cover on the wall mount and screw the cover.
Wall Hanger Assemble
*cables
arrange
Cut off the flake on the bottom
of the cover with the side-cutting
pliers (not provided) to make a
breach as figure for the cables
to go through (if necessary).
Step 2
Only keep the drawing on the assembly guide
1-3
Use level gauge to
help the wall mount
installation.
09
10
