UNITED KINGDOM
Internet www.clasohlson.co.uk
Ver
. 20220517
Table/Wall Light
Art.no 36-8544 Model SP-WLW05-01B
Please read the entire instruction manual before using
the product and then save it for future reference. We
reserve the right for any errors in text or images and any
necessary changes made to technical data. If you have
any questions concerning technical problems please
contact our Customer Services.
Safety
• Never place the product where it is exposed to high
temperatures from hobs, ovens or other heat sources.
4. Fit the lamp housing onto
the wall plate, making sure
that the cable cut-outs and
set screw holes line up on
both parts.
Non-replaceable light source.
Wall mounting
3. Screw the wall plate to the
wall. Use fasteners suitable
for the surface material
and ensure that there are
no electrical wires or water
pipes in the wall where you
intend to drill/screw.
Care and maintenance
Clean the product by wiping it with a damp cloth.
Use a mild detergent, never use solvents or strong,
abrasive cleaning agents.
Responsible disposal
This symbol indicates that the product
should not be disposed of with general
household waste. This applies throughout
the entire EU. In order to prevent any harm to
the environment or health hazards caused by
incorrect waste disposal, the product must
be handed in for recycling so that the material can be
disposed of in a responsible manner. When recycling the
product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product
is disposed of in an environmentally sound manner.
Specifications
Rated voltage
230 V AC, 50 Hz
Light source
Built-in LED 400 lm
4 W, 0.38 A, 9 V DC
Energy efficiency class
F
IP rating
IP20
Dimensions (l × w × h)
120 × 105 × 150 mm
5. Refit and tighten the two
set screws.
For indoor use only.
Warning:
Electric shock risk. The light
source in this light fitting is not replaceable.
When the light source has reached the end
of its service life the whole light fitting must
be discarded.
1. Remove the two set screws
that secure the lamp
housing to the wall plate.
2. Carefully detach the lamp
housing from the wall plate.
