Cotech KB-300-UK Quick Start Manual Download Page 1

GREAT BRITAIN 

For consumer contact, please visit  

www.clasohlson.co.uk and click on customer service.

ENGLISH

Soldering Iron 

Article number   18-3004  

model  KB-300-UK

 

30-9934   

 

KB-300 

Please read the entire instruction manual before using the product and save it for future refe-
rence. We apologise for any text or photographic errors and any changes of technical data.
If you have any questions concerning technical problems please contact our Customer  
Service Department.

Safety

-  The power lead should be regularly checked. Never use the device if the power lead or 

plug is damaged.

-  The power lead be changed if damaged in order to avoid the risk of chock or fire, but 

this should only be done by the manufacturer, qualified service centre or professional.

General Safety Requirements Soldering Iron

WARNING – FIRE RISK
The tool can become a fire risk if used improperly. Please take the following into consideration:
-  Be careful when using the tool in the vicinity of inflammable materials.
-  Never use the tool on the same area for extended periods.
-  Never use the tool in the proximity of explosive surroundings.
-  Heat can be spread to inflammable materials which are out of sight.
-  Let the tool cool sufficiently before putting it away for storage.
-  Never leave the tool unattended.
-  Never expose the tool to rain or moisture.

Use

1.  First check that the soldering iron’s rated voltage agrees with the mains voltage. 
2.  Check that the tip of the soldering iron is securely fastened and that the screws are tight. 
3.  Plug the power lead into a wall socket.
4.  Check that the tip’s terminals are clean and not damaged. 
5.  “Tin” the tip by heating it and covering it in solder. 
6.  Use the soldering iron to heat up the soldering surfaces, not the solder. 
7.  Apply a sufficient amount of solder to the joint and then let the joint cool off. 
8.  Clean the tip with a wet sponge while it is still warm. 
9.  Disconnect the soldering iron and let it cool off by itself. 

Disposal

Follow local ordinances when disposing of this product. If you are unsure about the disposal 
of this product contact your municipality.

Specifications

Rated Voltage: 

230 V AC, 50 Hz

Power:   

300 W

Lead length: 

130 cm

Ver

. 200

803

Reviews: