Costar CDI2510VIFWLH, Quick Manual

Page: 5 / 12

5 Network Camera
Camera Installation
Removing the Dome Cover
1
Loosen the screws counterclockwise using the
allen wrench provided with the product.
2
Remove the dome cover.
Inserting a SD Memory Card
micro
SD
Insert a SD memory card into the SD memory card slot
with the ‘micro SD’ print facing upward.
Push the SD memory card until it disengages
from the slot, and then pull it out.
microSD Logo is a trademark of SD-3C, LLC.
Installation
• Check the wall or ceiling to see if it needs to
be reinforced. The camera may fall off if the
wall or ceiling is not strong enough to support
its weight.
• Install the camera in a shaded area. If the
camera is installed in direct sunlight, it may
affect adversely.
1
Use the screws, anchor provided with the camera
to secure the install bracket on a wall or a ceiling.
Use the provided guide pattern to check
the distance between the screws.
2
Push the network cable through the cable rubber,
using the protective connector provided.
Cable rubber
Protect
connector Cable