7
BEFORE FIRST USE
Water Test
CAUTION: Do not
use the kettle if it is
damaged. Contact
Customer Support
to
replace your kettle (see page 11).
Perform the water test before using your
kettle to make sure it’s working properly.
Do not
drink the water that is boiled
during this initial test.
1.
Remove all packaging from your
kettle and its accessories, including
any temporary stickers.
2.
Completely unravel the power cable
and place the power base on a flat,
level surface.
3.
Press the
Lid Release Button
to open
the lid.
[Figure 1.1]
4.
Fill the kettle with water to the “MAX”
line, then close the lid.
[Figure 1.2]
Place the kettle onto the power base.
Plug in.
5.
Press the
On/Off Switch
. The blue
indicator light will turn on.
[Figure 1.3]
6.
The kettle will automatically turn off
once it has finished boiling the water.
Allow it to cool for at least 5 minutes,
then pour out the water.
Figure 1.2
Figure 1.1
Figure 1.3
Summary of Contents for CDK-SE151-KUS
Page 13: ...13 NOTES...
Page 14: ...14 NOTES...
Page 15: ...15 NOTES...
Page 16: ...Questions or Concerns support cosori com SR071521AC M1_M1_0621CDK SE151 KUS...
