10
11
INSTALLATION INSTRUCTIONS
CAUTION:
HOOD
MAY
HAVE
VERY
SHARP
EDGES;
PLEASE
WEAR
PROTECTIVE
GLOVES
WHENEVER
IT
IS
NECESSARY
TO
REMOVE
ANY
PARTS
FOR
INSTALLING,
CLEANING
OR
SERVICING.
Wall Mount
Installation Method
1.
A.
Find the 4 mounting holes in the back of the
range hood. Mark their locations at the installation
location with a pencil or marker.
B.
Drill 5/16 (8mm) hole at each of the marked
locations.
C.
Insert anchors along with screws into each drilled
hole. Firmly tighten the screw into place.
D.
Hang your Range Hood into place by aligning the
screws with the 4 mounting holes in the back of the
range hood.
Lock into place by sliding down the
range hood.
RECIRCULATING CHARCOAL FILTERS
Skip this page if you are installing a Ducted Range Hood.
Charcoal Filters are only included with Ductless Models.
Carbon Filter
Twist to
Lock in Place
Twist to
Unlock
1.)
Remove the aluminum filters.
2.)
The charcoal filter is installed at the end of the motor. While
pressing firmly on the center, twist the carbon filter clockwise to
lock into place.
3.)
To replace the carbon filter, reverse the process and repeat.
NOTE:
The carbon filter cannot be washed and reused and must
be replaced every 4-6 months, depending on use.
When installing,
press firmly on
the center of
the filter.
SCAN FOR INSTALLATION VIDEO
