Cosen C-420NC, Instruction Manual

Page: 3 / 138

NOTE:

Read this instruction manual carefully to familiarize yourself with the installation, operation
and maintenance of your COSEN bandsaw machine.

Operate the machine following the procedures described in the manual to prevent personal
injuries or machine damage.

Keep this manual handy and refer to it whenever you are uncertain of how to perform any of
the procedures.

For technical support or parts purchase, please contact your nearest COSEN representative or
our service center:
For US, Mexico, and Canada:
email: info@cosensaws.com.
phone: +1 ‐ 704 ‐ 943 ‐ 1030
toll free: +1 ‐ 877 ‐ SAWING1
fax: +1 ‐ 704 ‐ 943 ‐ 1031
For Taiwan and other countries:
email: info@cosen.com
phone: +886 ‐ 3 ‐ 5332143
fax: +886 ‐ 3 ‐ 5348324
For Europe:
email:
europe@cosensaws.com
phone: +31 ‐ 77 ‐ 7600280
fax: +31 ‐ 77 ‐ 7600288
For China:
email: service@cosensaws.cn
phone: +86 ‐ 152 ‐ 50127815
Instruction Manual: C ‐ 420NC
SNC ‐ 100 Programmable Automatic Mass Production Horizontal Bandsaw
Ver.5 2017/1/23
©
2013 by COSEN MECHATRONICS CO., LTD.
No part of this publication may be photocopied or otherwise reproduced without the prior written permission of COSEN.
Printed in Taiwan
FROM THE MANUFACTURER
Thank you for your purchase of COSEN’s bandsaw machine and your trust in the
COSEN brand.
We are excited to have you as our valued customer and look forward as much as you
do to the accelerated productivity, long ‐ lasting endurance and superb
cost ‐ effectiveness this machine is about to bring to you.
To ensure you are fully utilizing our machine and being advantaged in every possible
way, please do take your time and read through this instruction manual.
Any comment or suggestion in making our service better, please do not hesitate to
let us know. Thank you again!