Cosen C-325NC, Instruction Manual, Page: 24 / 110

GENERAL INFORMATION
Section 2
2-8
Red and white DANGER labels mean immediate hazards that will result in severe personal
injury or death.
DANGER: Do not operate this machine unless it is completely assembled.
DANGER: Before doing any electrical work, disconnect the electrical power with the Main
Power Disconnect switch.
DANGER: Before working near moving parts, disconnect the electrical power with the
Main Power Disconnect switch.
DANGER: Keep all guards and shields in place before installing or starting up the machine.
DANGER: It is dangerous to operate the machine when the floor is slippery. Keep the floor
clean and dry. Check for ice, moisture, or grease before entering.
DANGER: Do not use the machine to cut explosive material or high pressure vessels. Since it
will generate high heat during the sawing process that will ignite an explosion.
Read all WARNINGS to prevent personal injury
Orange and black WARNING labels mean hazards or unsafe practices can result in severe
personal injury or death.
WARNING: This manual has important safety information. All users must read it before
performing any activity on the machine, such as replacing the saw band or
doing regular maintenance.
WARNING: Some personal protective equipment is required for the safe use of the
machine, e.g. protection goggles.
Read all NOTICES to prevent equipment damage
Blue and White NOTICE labels mean unsafe practices that could result in damage to products
or property.
NOTICE: The transmission fluid of the speed reducer needs to be replaced.