6.2 Output side attaching external capacitor
¡
Depending on the capacitance of the external capacitor, reso-
nance may occur due to ESR, ESL, and wiring inductance, so
please be careful of ripple increase.
¡
If the external capacitor is too large, the power supply might not
start up.
Co Load
+Vout
-Vout
+
Fig.6.13 Output side external capacitor connection method
Table 6.32 Connectable External capacitor on the output side [μF]
(LHA10F, LHA15F, LHA30F, LHA50F)
Model
Output voltage
LHA10F
LHA15F
LHA30F
LHA50F
3.3V
0 to 3000
0 to 4000
0 to 2800
0 to 6100
5V
0 to 3000
0 to 4000
0 to 1300
0 to 2800
12V
0 to 1500
0 to 2000
0 to 1300
0 to 2800
15V
0 to 1500
0 to 2000
0 to 1300
0 to 2800
24V
0 to 1000
0 to 1500
0 to 920
0 to 1900
36V
-
-
-
0 to 1100
48V
-
-
-
0 to 920
Table 6.33 Connectable External capacitor on the output side [μF]
(LHA75F, LHA100F, LHA150F, LHA300F)
Model
Output voltage
LHA75F
LHA100F
LHA150F
LHA300F
3.3V
0 to 9200
-
-
-
5V
0 to 9200
0 to 240000
-
-
12V
0 to 4200
0 to 8700
0 to 6300
0 to 5600
15V
0 to 4200
0 to 8700
-
-
24V
0 to 2800
0 to 6300
0 to 2800
0 to 4900
36V
0 to 1600
0 to 1600
0 to 1600
-
48V
0 to 1200
0 to 1000
0 to 1000
0 to 1400
6.3 Others
¡
This power supply is the rugged PCB type. Do not drop conduc-
tive objects in the power supply.
¡
At light load, there remains high voltage inside the power supply
for a few minutes after power OFF.
Be careful of electric shock during maintenance.
¡
This power supply is manufactured by SMD technology. The
stress to PCB like twisting or bending causes the defect of the
unit, so handle the unit with care.
-
Please tighten screws in all mounting holes.
Model
Mounting holes
LHA10F, LHA15F, LHA30F
2 positions
LHA50F, LHA75F, LHA100F,
LHA150F, LHA300F
4 positions
-
Install it so that PCB may become parallel to the clamp face.
-
Avoid dropping unit.
¡
While turning on the electricity, and for a while after turning off,
please don’t touch the inside of power supply because some com-
ponents could be hot.
AC-DC Power Supplies Open Frame
Instruction Manual
LHA-42
May 26, 2022
