73
Page
MANUAL
We reserve the right to modify the product and the design.
MAINTENANCE
BRAKE PADS (CHANGE)
1. Remove the screw (1).
2. Remove the two screws (2) holding the clamp and remove it from its
housing.
3. Push the clamp piston to facilitate the removal of the pads.
4. Remove the pads.
5. Install the new brake pads.
6. For installation. follow these steps in reverse order.
DANGER
TO PREVENT DAMAGE TO THE CANOPY, DO NOT
ALLOW BRAKE FLUID TO COME INTO CONTACT
WITH IT DURING BLEED OPERATIONS.
IN ADDITION, WHEN BLEEDING THE BRAKE CALLIPERS,
DO NOT ALLOW THE FLUID TO COME INTO CONTACT
WITH THE BRAKE DISCS OR WITH THE BRAKE PADS.
FAILURE TO COMPLY WITH THIS RULE IS DETRIMENTAL
TO THE FUNCTIONING AND EFFICIENCY OF THE BRAKING
SYSTEM.
1
2
Summary of Contents for TERRAIN DX4 CAB
