COR-ACC980
V150921
Contents
1
Products
A.
B.
C.
D.
4
Allen Key and Screws
3
Terminal Cables
P1
P2
P3
P4
Installation
Using a screwdriver, screw the metal mounting plate
C.
to the wall.
Take off the plastic mounting plate
B.
from reader
A.
; and then, pull cable ends through the access
holes of
C.
and
B.
and attach
B.
back to reader
A.
.
Put on the elastic band
D.
embedded into the plastic frame.
Install Security Torx screw (supplied) into the hole of ACC980 at bottom with the Allen Key (supplied).
Apply power. Green and read Led will light up at the same time, and a beep sound.
2
C.
1
c.
A.
B.
3
4
5
A.
B.
C.
6
A.
B.
D.
7
8
A.
C.
g.
d.
Notice
The communication wires and power line should not be housed in the same electrical conduit or tubing.
They should always be installed in separate tubes.
Do Not connect the reader and lock to the same power supply. While the lock activating will case the reader's power unstable and might affect the reader function.
The standard connection of power supply is the door relay and the lock use the same power supply; the reader use independent power supply.
Use AWG 22-24 "Shielded twisted Pair" to avoid star wiring.
1.Tubing:
2.Cable selection:
3.Power supply:
Connector Table
P4.
Contact Rating: 1A 125VAC/24VDC
※
After S/N: 0706-XXXXXX
Wire Application
Tamper Switch
Wire
1
2
3
Color
Red
Orange
Yellow
Description
N.C.
COM
N.O.
P5.
(Optional)
Wire Application
3-PIN
Connector
Wire
1
2
3
Color
Black
White
Purple
Description
GND.
Duress
Arming
P3.
Wire Application
Networking
Module
Wire
1
2
Color
Thick Green
Thick Blue
Description
RS-485(B-)
RS-485(A+)
P2.
Wire Application
Wiegand
Beeper
LED
Wire
1
2
3
4
5
Color
Thin Blue
Thin Green
Pink
Brown
Yellow
Description
Wiegand DAT:1 Input
Wiegand DAT:0 Input
Beeper Output 5V
/100mA, Low
LED Green Output 5V
/20mA, Max
LED Red Output 5V
/20mA, Max
P1
P2
P3
P4
P5
P1.
Wire Application
Door Relay
Door Sensor
Exit Switch
Alarm Output
Power
Wire
1
2
3
4
5
6
7
8
Color
Blue White
Purple White
White
Orange
Purple
Gray
Thick Red
Thick Black
Description
(N.O.) DC24V1Amp
(N.C.) DC24V1Amp
(COM) DC24V1Amp
Negative Trigger Input
Negative Trigger Input
DC Power 12V
DC Power 0V
N.O. or N.C. shift by
JP1 jumper and
Shared Com with
Door Relay
2
User Guide