background image

O

WNER’S

I

NSTRUCTION

M

ANUAL

VALUE LINE

VALUE LINE

VALUE LINE

VALUE LINE

VALUE LINE

THANK YOU

FOR PURCHASING THIS

TELEPHONE

Your new telephone

 was made by people who

take a great deal  of PRIDE in producing quality

products to assure you years of trouble-free

service.

We want you to know all about your new

telephone

, how to install it, the features it provides,

and the services you can expect from its use. We have
included this information in your Owner’s Instruction

Manual.

PLEASE READ BEFORE INSTALLING
AND USING YOUR  NEW TELEPHONE.

6.

Do not place any objects on the telephone line

cord

. Do not locate the telephone  where the line cord will

be walked on.

7.

Do not block or cover ventilation slots and

openings

 in the bottom of  the telephone.  The openings

should never be blocked by  placing the telephone on a
bed, sofa, rug, or other similar surfaces. This telephone
should never be placed near or over a radiator or heat
register. This telephone should never be placed in a
built-in installation unless proper ventilation is provided.

8.

Never spill liquid on the telephone or push

objects of  any kind through ventilation slots

. Liquid or

objects may touch  dangerous voltage points or short out
parts that could result in a risk of  fire or electrical shock.

9.

Do not disassemble this product

. Opening or

removing covers may expose you to dangerous voltages
or other risks. Incorrect reassembly can cause electrical
shock when the product is subsequently used.

10.

 

Avoid using a telephone during a local

thunderstorm

. There may be a remote risk of  electrical

shock from lightning.

11. 

Do not use a telephone in the vicinity of  a

gas leak

 to report the leak, or otherwise.

12. 

Unplug the telephone from the wall outlet

and  refer servicing to qualified service personnel

under the following conditions:

• When the line cord is frayed or plugs

damaged.

• If  liquid has been spilled into the telephone.
• If  the telephone has been exposed to rain or

water.

• If  the telephone does not operate properly by

following the operating instructions.

• If  the telephone has been dropped orthe

housing damaged.

•If  the telephone exhibits distinct change in

performance.

IMPORTANT SAFETY INSTRUCTIONS

Always follow basic safety precautions

 when us-

ing your telephone equipment to reduce the risk of  fire,
electrical shock, and injury.

1.

Read and understand all instructions

 in the

Owner’s Instruction Manual.

2.

Read all warnings

 and follow all instructions

marked on the product.

3.

Unplug this product from the wall outlet  be-

fore cleaning

.  Use a damp cloth for cleaning.  Do not use

liquid or aerosol cleaners.

4.

Do not use the telephone near water

. For ex-

ample, do not use near a bathtub, wash bowl, kitchen sink,
laundry tub, swimming pool, or in a wet basement.

5.

Do not place this product on an unstable cart

or stand

. The product may fall causing serious damage to

the product.

THE FCC WANTS YOU TO KNOW

DESIGN COMPLIANCE

  Your telephone is designed to comply with

FCC Rules and Regulations, Part 68. It can be connected to the telephone network as
FCC-registered terminal equipment. The registration number is printed on the label
on the bottom of  your telephone.

NOTIFICATION TO THE TELEPHONE COMPANY

  As acustomer of

the local telephone company, you must, if  they ask, tell them before connecting your
telephone to the telephone company lines. The telephone company may need the FCC
registration number and the ringer equivalence of  the telephone. This information is
printed on a label on the bottom of  your telephone.

RINGER EQUIVALENCE

  The ringer equivalence indicates the amount

of  power that your telephone draws from the telephone company line during ringing.
The number is printed on the label on the bottom of  your telephone.

If  you have more than one telephone (or other terminal device) connected

to the telephone company line, you should total the ringer equivalence numbers
(REN’s), and be sure that the total is not more than five. Your telephones may not
ring if  the total is more than five. Also, in some rural locations, your telephone may
not ring if  the REN total is more than three.

RESTRICTIONS

  You must not connect your telephone to coin-operated

lines or party lines.

INTERFERENCE POTENTIAL

  If  your telephone has a push-button

dial, it may generate radio frequency energy. If  not properly used, it may interfere
with radio and television reception. If  the telephone does cause interference with
reception, move the radio or television to another electrical circuit or another
location. If  necessary, you may need to seek advice from an experienced technician.

INSTALLATION

   This model telephone must be connected to the

telephone company lines through a modular jack. The required USOC for the
modular jack is RJ11C for desk mounting and RJ11W for wall mounting. The USOC
number is printed on the label on the bottom of  your telephone.

TYPE OF DIALING

  If  your telephone has a push-button TONE dial,

you must have TONE service from your telephone company to use your telephone for
dialing. If  your telephone has a rotary dial, you are not required to have TONE
service.  Note that you will usually be charged extra for TONE service.

HEARING-AID COMPATIBILITY

  The handset on your telephone will

work with magnetically-coupled hearing aids. You can use a hearing aid equipped
with a T (Telephone) switch.

IN CASE OF TROUBLE 

 If  your telephone should cause problems on the

telephone line, the telephone company can temporarily disconnect your service. The
telephone company must then notify and allow you to correct the problem.

The telephone company may from time to time change its lines or

equipment. They must notify you if  planned changes will affect your telephone
service, to allow you to take steps to prevent interruptions.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.

S

AVE

 T

HESE 

I

NSTRUCTIONS

2500XX

2500XX

2500XX

2500XX

2500XX-----VBA

VBA

VBA

VBA

VBA-20MT

-20MT

-20MT

-20MT

-20MT

2554XX

2554XX

2554XX

2554XX

2554XX-----VBA

VBA

VBA

VBA

VBA-20MT

-20MT

-20MT

-20MT

-20MT

2500

2500

2500

2500

2500

2554

2554

2554

2554

2554

**”XX” is color code

Reviews: