© Copyright, Core Protection Systems Ltd, 2021
Page 25
Additionally, for those wearing their respirator and filters day-after-day, it is advisable to own three
pairs of filters per mask and use them on rotation (pair 1 on the first day, pair 2 on the second, pair 3
on the third, then returning to pair 1 on the fourth day and so on).
This is so the filters can be stored in a polythene bag as specified above for 3 days, which would cause
the COVID-19 contaminants to die provided the storage bag is zip-locked and contains a dry desiccant.
This is an extra measure that we propose for user safety.
If only one pair of filters are accessible, this is acceptable provided that the filters are thoroughly
disinfected after use.
3.3.5 Disposal
To establish the safest disposal method for the F1100 range of filters, this will require a risk
assessment by your organisation. However, Corpro can provide the following information and
recommendations:
•
In terms of recycling the F1100 range of filters, there are a few considerations.
o
The cartridges are made out of acrylonitrile butadiene styrene (ABS) plastic and so
can be easily recycled. The cartridge should be thoroughly
disinfected/decontaminated before recycling.
o
For the internal elements of the filters, the materials may have been exposed to a
range of potentially harmful dusts, dirt and chemicals, so it is unlikely that these
elements can be readily recycled. However, it may be possible to engage third-parties
who specialise in the disposal of such items, e.g., the activated carbon inside of a
gas/vapour filter may be able to be dried and reactivated by a specialist.
•
Depending on your working environment, you may not be able to recycle any materials as the
filters may be classed as hazardous waste. This would need to be checked and, if classed as
hazardous waste, the appropriate disposal method should be outlined and followed.
•
If the filters are not classed as hazardous waste and recycling protocols have been evaluated,
the product should be disposed of or recycled as applicable in a controlled waste area at the
occupational site / an agreed third-party site.
3.4 Accessories
There are a wide range of accessories in the Corpro range. This section will discuss training and
maintenance of the more commonly used accessories. If you would like to find out more information
