corob EVOFLX-LW, User Manual

Page: 18 / 45

COROB EVOFLX-LW
- 16 -
5 SHIPPING AND HANDLING
5.1 General warnings
Personnel in charge of these operations must wear the following personal
protective equipment.
5.2 Unpacking and placement
Store the packing material for future use, or dispose of it according to current regulations. In any case, we recommend
that you keep it for the entire duration of the machine warranty.
Ma ke s u re t h e p a c ki n g h a s n o t suf fered a ny d a m a g e o r t a m pe r i n g d u r i n g s h i p p i n g ; i f s o, co nt a ct
t h e a u t h o r i ze d te c h n i ca l s e rv i ce o r yo u r d e a l er.
1. Cut the straps.
2. Remove cardboard box.
3. Remove the machine wrapping. Take out any accessories and/or material supplied with the machine
.
4. Remove the brackets that fix the machine to the pallet..
5. Grasp the machine on the sides (this must be done by at least two people) slide it slowly along the platforms to the
ground.
6. Lower the feet to support and level the machine properly, and make sure that the wheels are not resting.
To repack the machine, follow the unpacking instructions in reverse order. We recommend reusing the original packing
any time the machine must be moved or shipped
.
DANGER
To avoid personal injuries and property damage, use the utmost care and caution when handling the machine, and
carefully follow the instructions given in this chapter.
WARNING
The packing must be handled only by qualified personnel using appropriate handling equipment. Do not stack
items on the packing
.
dd
If t he machine is installed near a wall, keep it at least 10 cm (4”) away to prevent the cables from being crushed.
6 mm
To remove the fixing brackets
10 mm
DANGER
The following procedure must be carried out by at least 2 people.
DANGER
Should the machine appear damaged during shipping, do not attempt to start it and contact the authorized
technical service or dealer
.