corob EVOFLX-LW, User Manual

Page: 17 / 45

- 15 -
COROB EVOFLX-LW
After eliminating the cause of the malfunction or solved the dangerous condition, reset the button by pulling it
.
4.7 Requirements of the installation site
Environment requirements for the site where the machine is to be used:
• Clean and dust-free.
• With level and stable floor.
• Fitted with a grounded power supply socket.
• Equipped with sufficient lighting to ensure good visibility from every point of the machine (light value not lower
than 500 Lux).
• Ventilated to prevent the concentration of harmful fumes.
• Temperature between 10 °C (50 °F) and 40 °C (104 °F) and relative humidity between 5% and 85%, without
condensation.
dd
The emergency button does not turn the computer off
,
since it requires special shut
‐
down procedures (the
auxiliary sockets remain powered).
WARNING
The use of the emergency stop button is to be considered as an emergency action exclusively, and not as a
standard stop mode, in order to prevent machine deterioration.
WARNING
The environment working conditions are strictly related to the type of colorants used (ask for information from the
paint manufacturer). The requirements indicated above are valid for the machine only.
Do not place the machine near heat sources or in direct sunlight. Also humidity sources should be avoided. The
machine must be used indoors only.
Environment conditions outside the values indicated (chapter 9.1) may cause serious damage to the machine
,
especially the electronic equipment
.
DANGER
When using colorants containing volatile solvents the room in which the machine is installed must be
spacious, with good ventilation (air exchange) and no type of parts must be leant against or stocked close to the
machine.
Avoid naked flames or material that may create sparks and cause a fire .