2
Unisub 1U, Unisub 1U Splitter
Contents
1. General
2. Set contents
3. Opening side conversion
4. Frame Installation
5. Incoming cable installation and splicing
6. Splitter version.
7. Installation in 21" frame.
Warning!
Possible laser/LED radiation in the non-visible spectrum!
Never look into open fiber ends if the level of risk from laser/LED radiation is not known.
Important
The assignment of the risk level must be specified definitively by the site technician/operator responsible for
the communications facility and must be indicated accordingly (e.g. by attaching standard-compliant warning
signs as per the current edition of DIN EN/IEC 60825-1, and in accordance with the current edition of BGV B2
“Laser radiation”). If there is any change in the technical data relating to the risk level, the warnings must be
adapted accordingly and occupational safety precautions must be taken if required, see also e.g. the current
edition of DIN EN/IEC 60825-2.
1. General
This unit is designed for connectorization in two configurations: as a patching unit or splitting unit. It can be fixed in standard
19 inches frames and 21 inches frames with use of alternative brackets. Subrack is preassembled with up to 40 SC APC
adapters, 3 FRM splice trays or 1 tray and splitter in second variant. Subrack has an easy and full front access and can
be opened on both sides after simple on-site conversion.
1.1
Tools required
1. Philips screwdriver
2. Open end wrench no.10
