CORNING PS-AU-AIR, User Programming Manual

Page: 8 / 46

Corning Optical Communications
User Manual | Page 8
Verifying the Contents
To verify the contents of the package:
1. Verify that the contents and quantities agree with the Delivery Packing List.
2. Check the device model against the Delivery Packing List.
3. Notify SUNWAVE immediately if any discrepancies are discovered, to verify whether the complete and correct shipment
has been received.
Inspecting the Device
After unpacking the device, place the device on solid ground and check the following to ensure the device has not been
damaged:
1.
Inspect the device’s appearance, overall dimensions, and weight.
2. Check that the device has not been deformed or bent in any way.
3. Check that there are no warps, scratches, bubbles, or dirt marks.
4. Check that there are no loose, missing or incorrectly fastened screws.
5. Check that the installation slots in the cabinet sub-rack are rectangular.
6. Ensure that the guide bar has not been damaged and the fittings and auxiliary parts are intact.
7. Check that the silk-screened images on the device are visible and intact.
Installation Preparation
Site Investigation
Before installation, the installer should contact the project director to ensure that the site is suitable for installation.
Details required include information about the installation site such as whether there is an iron tower or high mast
nearby, the surrounding environmental conditions such as temperature and humidity, the power source, and so on.
Installation staff should complete a site investigation with the project director before construction and conduct field
observation of the installation site and the coverage area of the device, to confirm factors such as signal intensity, signal
quality, the required coverage range, device location, antenna-feeder system, and power supply system.
Note: Only maintenance personnel or users who understand the reason for access and are experienced with restricted
area access and understand the necessary preventive measures should access the installation site.