Cornell CCF-169CP, User Manual

Page: 5 / 8

4

Always attach plug to appliance first, then plug cord into
the wall outlet. To disconnect, turn OFF any control,
then remove plug from wall outlet.
How to Assembly Table Fan

Attach the rear guard to the front side of the motor;
fasten the guard interlocking nut by turning it clockwise
until the guard is secured firmly in place.

Mount the fan blade onto the motor shaft; fasten the
blade knob by turning anti-clockwise firmly.

Installing the front guard:
- Open the front guard clip and attach the hook to the
rear guard.
- Push the round edges of front guard to fit it securely
into the rear guard.
- Lock the clip.

Installing the base:
- Insert the stand body to the base unit firmly. Reverse
the whole unit and secure the stand body by fitting the
molded securing knob from the bottom of the base
unit.
- Connect and fix the fan body to the stand body.
- Ensure the stand body is completely interlocked with
the base unit.
- Insert the panel to the stand body and lock it into
position by turning the panel screw clockwise. Loosen
the height adjustment knob to extend the extension
tube to the required height and then tighten the
securing knob.