REFRIGERATION INSTALLATIONS LIMITED
Unit D9 Newton Business Park
Cartwright Street
H y d e
Cheshire SK14 4EH
Telephone: +44 (0)161 366 1110 Fax: +44 (0)161 366 1190
D ocument Reference: WI 9 Page 14 of 14
Issue 02
10.1 Motor Replacement (Continued)
10.1.3 Carefully lift the top ventilated moulding away to reveal the
motor and its wiring. The centre moulding and bottom moulding
should be kept in close contact.
10.1.4 Disconnect the three wires from the spade terminals on
the base of the motor supply connector and gently lift off the centre
moulding complete with motor, toothed drive belt and the primary
drive cog. The larger secondary drive cogs should remain in the
bottom moulding.
Motor
Motor wiring
Motor supply
connector
Top
ventilated
moulding
Centre moulding
(motor mounted on
other side)
Toothed drive belt
Primary drive cog
Secondary
drive cogs
