background image

Ice Maker Adapter Kit Installation Instructions

© 1999-2010, IMI Cornelius Inc.

- 1 -

Publication Number: 620917305

INSTALLATION INSTRUCTIONS

F

OR

 I

CE

 M

AKER

 A

DAPTER

 K

IT

 (P/N 629087002) 

AND

 (P/N 629087003)

For Hoshizaki Model Series: KM/KML 200/250/400/450/500/600/630/650

!

WARNING:

Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the 
user. Verify that all the power is off to the unit before performing any work.

Failure to comply could result in serious injury, death or damage to the equipment.

!

WARNING:

All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or 
the equipment manufacturer’s instructions.

Failure to comply could result in serious injury, death or damage to the equipment.

!

WARNING:

All of the attachment screws and plates must be installed as directed in this manual.

Failure to comply could result in serious injury, death or damage to the equipment.

Perform the following procedure to install the adapter kit.

1.

Unpack kit. Make sure all parts in kit are present and in good condition.

2.

Position the ice maker adapter lid on the dispenser flush with the rear of the cabinet as shown in Figure 1.

3.

Seal ice maker to top of the dispenser adapter lid as follows:

A.   Locate the ice maker flush with the rear of the lid and centered (for 24-1/2 inches wide dispenser) as 

shown in Figure 1. Run a bead of RTV on the lid inside the perimeter of the ice maker base outline so 
that the ice maker will set on the RTV.

Table 1. Applicable Models

Kit Part No.

                           Dispenser Model

629087002

DF/ED150 - 6 Valve (22 inches wide)

629087003

DF/ED 150 - 8 Valve (24-1/2 inches wide)

Table 2. Loose Shipped Parts

Item No.

Part No.

Name

Qty.

1

620034802

Adapter Lid (629087002 Kit)

1

620034902

Adapter Lid (629087003 Kit)

1

2

620034808

Manual Ice Fill Cover (629087002 Kit)

1

620034901

Manual Ice Fill Cover (629087003 Kit)

1

3

22127

Bracket, Ice Maker Mounting

2

4

620701601

Screw, Sheet Metal, No.10 by 1/2-inch Long

12

5

70209

Thumbscrew, No. 8-32 by 3/8-inch Long

1

6

50904

RTV, 3-oz. Tube

1

7

620028305

Bracket, Bin Thermostat

1

8

70164

Screw, Truss-Head, No. 8-32 by 3/4-inch Long

2

9

70100

Nut, Nylok, No. 8-32

2

10

91957

Label, “Disconnect Power Before Cleaning”

1

11

620917305

Installation Instructions

1

Release Date: November 10, 2010

www.cornelius.com

Revision: C

Reviews: