ED150-8V “K” Style Lid Kit Installation Instructions
© 1999-2010, IMI Cornelius Inc.
- 1 -
Publication Number: 620918802
INSTALLATION INSTRUCTIONS
F
OR
ED150-8V “K” S
TYLE
L
ID
K
IT
(P/N 629084002
AND
629084009)
This “K” style kit applies to the following ice makers:
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer’s instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
1.
Unpack the kit.
2.
Place insulation strip (Item 12) over studs on the baffle and Insert baffle assembly into the adapter lid.
3.
Place two (2) sealing cap washers (item 9) over studs and two (2) nylon washers (item11), then fasten in place
with two (2) acorn nuts (item 8).
Table 1. Applicable Models
Ice Maker
Width
AC and WC Cornelius 322/522
22”
Table 2. Loose Shipped Parts
Item No.
Part No.
Name
Qty.
1
52934
Cover, Gray
1
52994
Cover, Black
1
2
620028801
Lid Assembly
1
3
22127
Bracket
2
4
70217
Screw, No. 8
12
5
50904
RTV
1
6
90221
Label
1
7
620918802
Installation Instruction
1
8
620701902
Acorn Nut, Nylon, 8-32
2
9
620701901
Sealing Washer
2
10
620037007
Ice Baffle, DF/ED150
1
11
621701903
Nylon Washer, #8
2
12
620505804
Insulation Strip
1
13
50456
Nylon Clamp, 1/4-in.
2
14
70171
Screw, Phillips Hd; SS, 8-32 X 3/8 in.
2
15
50377
Nylon Clamp, 1/8-in.
2
16
50309
Vinyl Tubing, 1/8-in. Dia. by 1/2-in. Long
25
17
631500000
Bin Stat Kit
1
Release Date: November 11, 2010
www.cornelius.com
Revision: B
