Operators Manual
Publication Number: 620920865 - 8 - © 2018, Cornelius Inc.
T
O
A
SSEMBLE
1.
Slide the drip tray with grill into place.
2.
Consider installation of a drain hose which connects to the outlet on drip tray bottom (Part No. S-
3379).
3.
Turn bowl upside down and insert gasket into groove. Wet gasket for ease of insertion, pressing gasket
into groove while following the number sequence (1 - 9) shown in Figure 2.
Press In Gasket
According to Sequence
Shown Until Gasket is
Completely Seated
Figure 2.
4.
Check that bowl spout gasket is mounted properly to the base assembly, as shown in Figure 3.
Bowl Spout Gasket
Figure 3.
5.
Slide bowl over the cooling dome and assemble the bowl to the dispenser. Be careful not to wrinkle the
gasket. If gasket is wrinkled, beverage will leak out of bowl. See Figure 4.
Cooling Dome
Figure 4.