IDC 255 Progate Drive Thru Installation Manual
Publication Number: 621057419INS
- 4 -
© 2006, IMI Cornelius Inc.
INSTALLATION
M
OUNTING
AND
P
LACEMENT
IMPORTANT: TO THE INSTALLER.
It is the responsibility of the Installer to ensure that the water supply to the dispensing equipment
is provided with protection against backflow by an air gap as defined in ANSI/ASME A112. 1.2–
1979; or an approved vacuum breaker or other such method as proved effective by test.
Water pipe connections and fixtures directly connected to a potable water supply shall be sized, installed,
and maintained according to Federal, State, and Local laws.
1.
Locate the dispenser indoors on a level counter top.
A. LEG OPTION
Unpack the four (4) legs and install them into the threaded holes provided in the bottom of the
unit. The installer must provide flexibility in the product and utility supply to permit shifting the
position of the dispenser sufficiently to clean the area beneath it.
COUNTER MOUNTING
The ice drink dispenser must be sealed to the counter. The template drawing indicates where openings
can be cut in the counter. Locate the desired position for the dispenser, then mark the outline dimensions
on the counter using the template drawings. Cut openings in counter.
FIGURE 2
30
26 3/8
1 13/16
1 5/16
18 5/8
12
9
3 1/2
9 1/2
11
23
21 1/4
30
31 1/2
REMOVABLE SINK
RECOMMENDED COUNTER OPENING SIZE
9 X 12 FOR UTILITIES AND BEVERAGE
TUBING. OPENING CAN BE LOCATED
ANYWHERE WITHIN SHADED AREA.
7/16 DIA.
23 1/16
Z Style