IDC 255 Progate Drive Thru Installation Manual
Publication Number: 621057419INS
- 12 -
© 2006, IMI Cornelius Inc.
L
ID
D
ISPENSER
O
PERATION
To dispense a lid:
1.
Place hand in finger slot
2.
Grab edge of lid and pull.
L
ID
D
ISPENSER
M
AINTENANCE
The lid dispensers are manufactured out of materials that can survive chlorine-based cleaners and warm
water <100
°
F. Ensure that the parts are thoroughly dried before refilling with lids.
NOTE: Lid dispenser parts should not be soaked in the powersoak washing machine as this will
result in the parts getting scratched. Instead the dispenser parts should be rinsed in warm soap
water and then dried.
P
ROGATE
2 C
ONTROL
B
OX
O
PERATION
Portion Control Box Functions
The portion control box on the PROGATE 2 has several functions including dispensing 4 programmed ice
portions for 4 cup sizes, programming and a manual dispense mode.
1.
Main Power ON OFF:
Turns power to the entire machine off. Lights Orange when ON.
2.
Agitator Push ON:
Turns on agitator and opens ice gate allowing continuous dispense. This button
will turn green in the manual mode and be off in PROGATE automatic. This button will also agitate
in the automatic mode but not dispense ice.
3.
Mode Switch Manual/Progate:
Turns on agitator and opens ice gate allowing unlimited ice portion.
4.
Program Button:
The programming button is used with cup size button enabling the user to enter
the portion programming mode to adjust the ice portions. The programming button is used with the
directional arrow buttons to adjust the agitation time.
5.
Ice Portion Dispense Buttons:
Used to dispense the appropriate ice portion. Can also be used in
conjunction with the program button to program a portion size.
LID PIVOT POINT
LID SUPPORT
LID
FINGER
GUIDE
POSITION 1
POSITION 2
POSITION 3
BASE
1
2
3
6
5
7
8
4
1. MAIN POWER ON/OFF
2. AGITATOR PUSH ON
3. MODE SWITCH MANUAL/PROGATE
4. PROGRAM BUTTON
5. ICE PORTION DISPENSE BUTTONS
6. ICE PORTION BAR
7. PROGATE ON LIGHT
8. PORTION SIZE UP/DOWN KEYS