ED 2XX Icemaker Adapter Kit Installation Instructions
© 2006-2010, IMI Cornelius Inc.
- 1 -
Publication Number: 620920831INS
INSTALLATION INSTRUCTIONS
ED 2XX I
CE
M
AKER
A
DAPTER
K
IT
FOR
USE
WITH
2 C
ORNELIUS
WCC S
ERIES
I
CE
M
AKERS
!
WARNING:
Disconnect power to the unit before installing the adaptor following all lockout/tag out procedures established by the
user. Verify that all the power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All ice baffle plates and bin stats, if included or recommended in this kit, must be installed as directed in this manual or
the equipment manufacturer’s instructions.
Failure to comply could result in serious injury, death or damage to the equipment.
!
WARNING:
All of the attachment screws and plates must be installed as directed in this manual.
Failure to comply could result in serious injury, death or damage to the equipment.
1.
Remove the plastic hopper lids from the top of the dispenser.
2.
Install soft ice agitator kit (
sold separately
) into the dispenser.
NOTE: This soft ice agitator kit is required for proper dispenser operation using “compressed” or
“soft” ice types. Failure to install this kit may result in undesirable beverage quality.
3.
Unpack the adapter kit.
4.
Assemble the baffle assembly onto the adapter lid as shown in Figure 1.
Figure 1.
5.
Set and secure adapter lid onto the dispenser as shown in Figure 2.
ACORN NUT
WASHER
SEALING WASHER
BAFFLE
Release Date: November 10, 2010
www.cornelius.com
Revision: B
