Installation/removal
Cornelius Deutschland GmbH
Document no. TD0004100
Version 01/07/2019, Index 1
Installation and service manual Tower
Nueva Style
10
Mounting the unit with a stand booster
step 3
3. Feed the tubes and cables through the opening into the supporting structure in a downward
motion.
4. Place the unit onto the prepared supporting structure.
Fig. 5
5. Attach the unit to the supporting structure using threaded bolts (Fig. 6/3), wing nuts (Fig. 6/1)
and washers (Fig. 6/2), and tighten the wing nuts evenly.
Check that the unit is properly attached. After attachment, the unit must not tilt or overturn.
Fig. 6
1
3
2
6. Remove the caps from all tubes.
7. Connect all tubes (Fig. 7/1) to the python (Fig. 7/2).
Observe the labels on each individual tube as you connect the tubes.
8. Properly insulate the tubes.
Fig. 7
1
2
9. Position the drip tray (Fig. 8/6) with grill on the unit; see chapter 7.2.
10. Connect the electrical cable (Fig. 8/5) (cable no. 220097434) to the transformer (Fig. 8/4) in
the undercounter cooler.
11.
Only for units with a display:
Plug the electrical cable (Fig. 8/1) into an earthed socket.
12.
Only for units with a display:
Connect a player (Fig. 8/2) with the USB connection (Fig. 8/3)
of the unit.
13. Put the unit into service (“commissioning”); see chapter 8.1.
Fig. 8
1
2
3
6
5
4
1. Attach the threaded bolts (Fig. 9/1), on the stand (Fig. 9/2) of the unit, by screwing the threaded
bolts into the stand (Fig. 9/2).
Fig. 9
1
2
1
