TigoBridge A1
User Manual
Copyright © 2021 CoreTigo Ltd.
Page
16
of
23
9.
Guidelines and Regulations
FCC ID:
2ATSM-TGBRIDGEA1
IC
: 26463-TGBRODGEA1
9.1. RF Exposure Warnings
Warning
: This device is only authorized for use in a mobile application. At least 20 cm of
separation distance between the TigoBridge A1 device and the user's body must be always
maintained.
9.2. Class A Warning
The FCC Wants You to Know
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
9.3. Modification Statements
FCC Warning (Modification statement)
CoreTigo LTD has not approved any changes or modifications to this device by the user. Any changes or
modifications can
void the user’s authority to operate the equipment.
ISED Warning (Modification statement)
CoreTigo Ltd.
n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle qu’en soit la
nature. Tout chang
ement ou modification peuvent annuler le droit d’utilisation de l’appareil par
l’utilisateur.
9.4. FCC Regulatory Notices
Interference statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
