HOW TO USE
- 7 -
During charging, the toothbrush will get warm, but
this is normal.
4
The operating duration will become shorter as the
battery gets older. If the toothbrush operates only for
1 short time after being fully charged, this means that
the battery is nearing the end of its life cycle. Contact
service center for support.
5
Slide the brush head onto the
handle. Push brush head down
until it locks into place on handle.
Note: There is small gap between
color ring and the handle.(Fig 1)
1
Wet the bristles and apply a small
amount of toothpaste.
2
Place the bristles against the teeth
at a slight angle towards the gum
line.(Fig 2)
3
Press the mode button to select mode. If you know
the mode used last time, you need not select mode
again. There are 4 modes.
a.
CLEAN
: Standard mode for superior teeth cleaning.
b.
SOFT
: Gently caress, carefully clean sensitive
mouth.
c.
WHITEN
: Teeth cleaning with polishing and
whitening.
4
45
Fig 2
Fig 1
