Page 23
TOOLS
Working on this product will require basic and/or sometimes specialty tools based on the type of service that
will be performed at any time. To assist, we recommend having the tools listed available when performing
maintenance.
Tool
Multi-meter
Screwdriver Set, Phillips
Socket Set, SAE
Screwdriver Set, Flat
Socket Set, Metric
Tape Measure
Socket driver
Ball-Peen Hammer
Open end wrenches, SAE
Rubber Mallet
Open end wrenches, Metric
USB - Flash Drive
Hex Bit Socket Set, SAE
Motorcycle straps, adjustable
Hex Bit Socket Set, Metric
Loctite 680
Adjustable Wrench
1’ Jumper wire w/ alligator clips
Snap Ring Pliers
zip ties – various sizes
Torque Wrench
IMPORTANT NOTE:
Do not use power tools on fasteners, it will damage the plastic shrouds.
To watch a maintenance video of Startrac treadmills scan or visit:
MAINTENANCE
