Page 6
10.
Once the mobility wheel has been deployed,
insert the mobility wheel pin into the second,
lower hole on the frame.
CAUTION:
Unit can tip to the right when
mobility wheel is deployed.
11.
Move the unit to its fi nal install location using the
mobility wheel.
12.
Once the 10G is in its fi nal install location, use a
12” ratchet wrench with a 19mm or 3/4” socket to
retract the wheel back into the frame.
13.
Reinstall the safety pin into the wheel up position
- the fi rst small hole.
14.
Use a 9/16” open-ended wrench to level the left
and right leveling feet.
15.
Once the machine is level, us the 19mm (3/4”)
open-ended wrench to tighten the nut against
the frame.
16.
Refer to the documentation contained in the
console box to proceed with installing the
console.
