Page 4
1.
Carefully cut and remove any plastic wrap and
cardboard around the unit.
2.
Cut any straps holding the unit to the pallet.
3.
Use a dead blow mallet and a crowbar to
carefully remove the small blocks of wood from
pallet located on the sides of the stepmill,
DO
NOT REMOVE THE BLOCKS IN FRONT OF THE
WHEELS.
DO NOT
REMOVE
4.
With the help of another person, carefully turn
the rear of the unit clockwise so that the leveling
feet are on the ground and the two transport
wheels are on the pallet.
Required Tools:
• 12”
Ratchet
Wrench
•
19mm or 3/4” Socket
• 19mm
Open-Ended
Wrench
• 9/16
Open-Ended
Wrench
•
Dead Blow Mallet
• Knife
• Crowbar
ASSEMBLY
