Page 14
REQUIRED TOOLS
Required Tools:
• 12mm Open-Ended Wrench
• Torque Wrench
• 4mm Allen Key
• 5mm Allen Key
• 8mm Allen Socket
• #2 Phillips Screwdriver
PACKAGING REMOVAL:
Unit is heavy and requires two people for assembly.
Carefully remove all packaging materials that wrap the equipment.
DO NOT USE A KNIFE OR BOX CUTTER AS YOU MAY DAMAGE THE EQUIPMENT.
At this time remove any sub-components from the pallet and set aside for later assembly. Once all packaging
has been removed, lay all parts out in a clean open area to prepare for assembly. Should any component not
be present or if you have any operational questions, please refer to
SUPPORT & SERVICE
After assembly, a complete visual inspection, and test of the features and functions of the assembled unit must
be made prior to use.
Please note that while the install images show the Z Bike, these instructions are also valid for the X Bike.
ASSEMBLY
