Page 6
716-0039-XX
SHORT FORWARD SUPPORT, HIIT ROWER
716-0038-XX
LONG FORWARD SUPPORT, HIIT ROWER
WASHER, M8, THICK, HARDENED, BEC
110-4117
Screw, M6x1.0, 20mm, SHC, HK, CS, ECB, Cl. 10.9
110-3672
110-4099
SCREW,M8 X 1.25, 110mm, SHC, HK, AS, CL-12.9, BLK E-COAT
740-7898
NUT, M8 X 1.25, CS, NYLOC, BLK E-COAT, GR-10
110-4121
Screw, M5x0.8, 10mm, THM, PH, BEC
Fig. 3
Assembly Hardware
Required Tools:
• Metric Allen Key Set
• Metric Allen Socket Set
• Phillips Screwdriver
• Torque Wrench
• Metric Open-Ended Wrench Set
ASSEMBLY
PACKAGING REMOVAL:
Unit is heavy and requires two people for assembly.
Carefully remove all packaging materials that wrap the equipment.
DO NOT USE A KNIFE OR BOX CUTTER AS YOU MAY DAMAGE THE EQUIPMENT.
At this time remove any sub-components from the pallet and set aside for later assembly. Once all packaging
has been removed, lay all parts out in a clean open area to prepare for assembly. Should any component not
be present or if you have any operational questions, please refer to
SUPPORT & SERVICE
After assembly, a complete visual inspection, and test of the features and functions of the assembled unit must
be made prior to use.
